Porsche 959

The Porsche 959 is a sports car manufactured by Porsche from 1986 to 1989, first as a Group B rally car and later as a legal production car designed to satisfy FIA homologation regulations requiring that a minimum number of 200 street legal units be built.[2]During its production run, it was hailed as being the most technologically advanced road-going sports car ever built and the harbinger of the future of sports cars: it was one of the first high-performance vehicles to use an all-wheel drive system; it provided the basis for Porsche's first all-wheel drive Carrera 4 model; and it convinced Porsche executives of the system's viability so well that they chose to make all-wheel drive standard on all versions of the 911 Turbo starting with the 993 variant. During its lifetime, the vehicle had only one other street legal peer with comparable performance, the Ferrari F40.[citation needed] The 959's short production run and performance have kept values high.[citation needed] In 2004, Sports Car International named this car number one on the list of Top Sports Cars of the 1980s.Development of the 959 (originally called the Gruppe B) started in 1981, shortly after the company's then-new Managing Director, Peter Schutz, took his office. Porsche's head engineer at the time, Helmuth Bott, approached Schutz with some ideas about the Porsche 911, or more aptly, a new one. Bott knew that the company needed a sports car that they could continue to rely on for years to come and that could be developed as time went on. Curious as to how much they could do with the rear-engined 911, Bott convinced Schutz that development tests should take place, and even proposed researching a new all wheel drive system. Schutz agreed, and gave the project green light. Bott also knew through experience that a racing program usually helped to accelerate the development of new models. Seeing Group B rally racing as the perfect arena to test the new mule and its all wheel drive system, Bott again went to Schutz and got the go ahead to develop a car, based on his development mule, for competition in Group B.Porsche began with an engine they already had, and moved on with development from there. The powerplant, a twin-turbocharged boxer six-cylinder engine with an air-cooled block and water-cooled heads, displaced 2.85 liters, about half a liter less than a contemporary 911 engine. The motor had originally been developed for the "Moby Dick" race car and then been redeveloped slightly for the short-lived Porsche Indy Car and several other projects before being "tweaked" a last time for use in the 961, the 959's racing counterpart. The water-cooled cylinder heads combined with the air-cooled block, 4-valve heads and sequential turbochargers allowed Porsche to extract 331 kW (444 hp) from the compact, efficient and rugged power unit.[3] The use of sequential twin turbochargers rather than the more usual identical turbochargers for each of the two cylinder banks allowed for smooth seamless delivery of power across the engine RPM band, in contrast to the abrupt on-off power characteristic that distinguished Porsche's other turbocharged engines of the period. The engine was used, virtually unchanged, in the 959 road car as well.
In an attempt to create a rugged, lightweight shell, Porsche adopted an aluminium and Aramid (Kevlar or Twaron) composite for body use along with a Nomex floor, instead of the steel normally used on their production cars[4]. The vehicle's weight of 3,190 pounds (1,450 kg) helped to achieve its high performance level.Porsche also developed the car's aerodynamics, which were designed to increase stability, as was the automatic ride-height adjustment that became available on the street car (961 race cars had fixed suspensions). Its "zero lift" aerodynamics were a big part of keeping it drivable.[citation needed] The 959 also featured Porsche-Steuer Kupplung (PSK) which was at the time the most advanced all-wheel-drive system in a production car.[citation needed] Capable of dynamically changing the torque distribution between the rear and front wheels in both normal and slip conditions, the PSK system gave the 959 the adaptability it needed both as a race car and as a "super" street car. Under hard acceleration, PSK could send as much as 80% of available power to the rear wheels, helping make the most of the rear-traction bias that occurs at such times[5] It could also vary the power bias depending on road surface and grip changes, helping maintain traction at all times. The magnesium alloy wheels were unique, being hollow inside to form a sealed chamber contiguous with the tire and equipped with a built-in tire pressure monitoring system.[6].The 1983 Frankfurt Motor Show was chosen for the unveiling of the Porsche Group B prototype. Even in the closing hours of October 9, finishing touches were being applied to the car to go on display the next morning. After the first two prototypes, the bodywork was modified to include air vents in the front and rear wheel housings, as well as intake holes behind the doors. The first prototype modified like this was code named "F3", and was destroyed in the first crash test.[citation needed]

The street version of the 959 debuted at the 1985 Frankfurt Motor Show as a 1986 model, but numerous issues delayed production by more than a year. The car was manufactured in two levels of trim, "Sport" and "Komfort", corresponding to the race version and the street version. First customer deliveries of the 959 street variant began in 1987, and the car debuted at a cost of $225,000 USD per unit, still less than half what it cost Porsche to build each one. Production ended in 1988. In total, 337 cars were built, including 37 prototypes and preproduction models.[1] At least one 959 and one 961 remain in the Porsche historic hall in Stuttgart, Germany.

In 1992/1993, Porsche built a strictly limited batch of eight 959s assembled from spare parts from the inventory at the manufacturing site in Zuffenhausen.[1] All eight were 'Komfort'-versions: four in red and four in silver. These cars were much more expensive (747,500 German Marks) than the earlier ones (420,000 German Marks). The later cars also featured a newly developed speed-sensitive damper system. The cars were sold to selected collectors after being driven by works personnel for some time[1] and are today by far the most sought-after 959s.

The 959 was not street legal in the United States prior to 1999 when the "Show and Display" law was passed, although an unknown number were imported via the "grey market" during the late 1980s as show pieces. During the model's development, Porsche refused to provide the United States Department of Transportation with the four 959s they required for crash testing, and the car was never certified by the NHTSA for street use in the U.S. With the passage of "Show and Display" the crash test requirements were removed and importation of the 959 was allowed, assuming the car could meet the emissions standards applicable in 1987. The 959 can be fitted with a catalytic converter and a rechipped computer which allows it to meet those emissions requirements. However, most owners refuse to modify their 959s, and the cars remain collection pieces. Most 959s are in the hands of collectors, but a few do occasionally come to market, with prices in the region of 180,000 - 250,000 EUR (cars produced in 1987/1988). It is impossible to estimate the price of cars from the highly limited batch of 1992/1993.The lessons learned from the 959 project about engine management, aerodynamics, suspension tuning and four wheel drive were what enabled the production life of the 911, once thought to be nearing obsolescence because of the extreme rearward placement of the engine, to be extended to the present day.

Specifications:

price $225 000 USD
engine Twin-Turbo Flat 6
valvetrain DOHC 4 Valves / Cyl
displacement 2849 cc / 173.9 cu in
bore 95.0 mm / 3.74 in
stroke 67.0 mm / 2.64 in
compression 8.3:1
power 335.6 kw / 450.0 bhp @ 6500 rpm
hp per litre 157.95 bhp per litre
bhp/weight
torque 500.3 nm / 369.0 ft lbs @ 5500 rpm
drive wheels Rear Engine / PSK 4WD
body / frame Fibreglass Reainforced Kevlar, Ployurethance Plastic & Aluminum
front brakes Vented Discs w/ABS
f brake size 322 mm / 12.7 in
rear brakes Vented Discs w/ABS
r brake size 308 mm / 12.1 in
front wheels F 43.2 x 20.3 cm / 17.0 x 8.0 in
rear wheels R 43.2 x 22.9 cm / 17.0 x 9.0 in
front tire size 235/45VR-17
rear tire size 255/40VR-17
steering Rack & Pinion
weight 1450 kg / 3197 lbs
wheelbase 2271 mm / 89.4 in
front track 1504 mm / 59.2 in
rear track 1549 mm / 61.0 in
length 4260 mm / 167.7 in
width 1839 mm / 72.4 in
height 1280 mm / 50.4 in
transmission 6-Speed Manual
top speed 313.8 kph / 195.0 mph
0 - 60 mph 4.1 seconds
0 - 100 mph 9.6 seconds
0 - 1/4 mile 12.5 seconds